Furnace Repair | When to DIY and When to Call the Experts

Before we discuss a thing or two about furnace repair Vancouver, it’s crucial that we focus on the problems that most of us face. When our furnace starts malfunctioning, we often get used to the odd things our machines do, or we stop getting worried about the strange sounds we hear in our houses. However, what we dismiss or ignore may also be a symptom of a much greater problem.

When it comes to furnace repair Coquitlam, we’re here to explain what’s natural and when you should opt for professional repairing. Cleaning your furnace is necessary, but you won’t always need to call for help. For a few instances, you can even go for DIY. Follow the tips we have mentioned below.

Reasons for Furnace Damage

When a filter becomes too polluted, it will keep clean air from passing into your house, making it warmer. This can mean that it turns “on”, but doesn’t stay on long enough to heat up. When your furnace overcompensates to keep your house warm, it will easily wear out or shut down.

  • Each 1-3 months, replace your air filter. 
  • When changing filters, turn off your furnace’s shut-off fan and set your thermostat to “off”.

Your furnace fan need not be on all of the time

If your fan is always blowing, you may be dealing with one of many issues. When your furnace’s fan is set to “auto,” it can only work when it’s in the middle of a heating cycle. If this isn’t the case, you may be experiencing one of the following issues:

Your fan isn’t set to the correct pace

Set your thermostat a degree or two below the current room temperature to see if this is the issue.

  • Wait a few minutes to see if it has reached the temperature.
  • If it doesn’t reach the desired temperature, this could indicate that the furnace could be working too hard to heat up. 
  • This may also indicate a concern with your home’s heat distribution. 
  • It’s tempting to cover up in the cool space or wear short sleeves in the heated places of your home, but avoiding hot and cold spots would just boost your heating bill. 
  • Ensure that your thermostat fan is set to “auto” rather than “on.”
  • The “on” turn would make your fan work even though it isn’t necessary. This will lead to higher monthly electricity bills and waste of energy.

Pay attention to the odor emerging from your furnace

Understandably, natural gas is odorless and colorless. In that case, how can you detect if there’s a leak? Well, there’s an advantage for you. Mercaptan is applied to gas lines in order to better detect leakages. Mercaptan gives off a rotten egg or sulfuric odor when mixed with other gases. If you detect this odor, turn off your gas valves right away.

Leaking gas is a serious threat. To fix the leak, contact your nearest gas utility provider. Choose Ariana Heating for a reliable furnace repair Vancouver based service.

Write a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.